Ultimate Passage Discount Marine Electronics
Call: 440-617-0025 (Ohio)
or QUESTIONS Via Email?  CLICK HERE!


  • Manufacturer
  • Category
  • What's ON SALE!
  • REBATE Items
  • Site Map
  •  Garmin
  •  Raymarine
  •  Lowrance
  •  Jabsco
  •  Motorguide
  •  Taco Down Riggers
  •  Xantrex
  •  ALL Navionics --OR:
  • Navionics "MSD" Format - Lowrance, Humminbird, Raymarine, Simrad

  • "CF" Format for older units PRE-2012
  •  C-Map
     Garmin Mapping
     Humminbird Charts
     Lowrance Insight
     Fishing Hot Spots
  • CONTACT US:
  • 440-617-0025 (Ohio)
    Monday-Thursday
    9am to 5pm
    Fridays until 3pm
    EASTERN TIME
    or
    via EMAIL Now!
  • Our Address:
    3399 Balsam Drive
    Westlake, OH 44145
    Note: NO RETURNS Accepted Here!
    Call/Email for an RMA.
  • Our Return Policy

  • Category: Plumbing Systems & Parts

    JABSCO IMPELLER KIT-8 BLADE-NEOPRENE-2-9/16" DIAMETER X 3" W, 5/8" SHAFT DIAMETER

    ** Jabsco Part Number - 17018-0001-P **

    Our SKU# - 50234
    JABSCO IMPELLER KIT-8 BLADE-NEOPRENE-2-9/16" DIAMETER X 3" W, 5/8" SHAFT DIAMETER
    Click Here for Larger Image
    Jabsco Impeller Kit - 8 Blade - Neoprene - 2-9/16" Diameter x 3" W, 5/8" Shaft Diameter
    Jabsco Part Number:17018-0001-P
    MSRP/Retail Price:$70.71
    OUR PRICE:$47.06
    In Stock? IN STOCK
    Condition: BRAND NEW
    from Jabsco

    (NOT a "Refurb" or "Reman"!)


    Jabsco Impeller Kit - 8 Blade - Neoprene - 2-9/16" Diameter x 3" W, 5/8" Shaft Diameter 17018-0001-P:

    Impeller Kit - 8 Blade - Neoprene - 2-9/16" Diameter x 3" W, 5/8" Shaft Diameter

    Features:
    • Material: Neoprene
    • Drive Type: Spline Drive
    • Number of Blades: 8
    • Dimensions: Diameter: 2-9/16", Shaft Width: 3", Shaft Diameter: 5/8"
    • Insert Material: Brass


    Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
    Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.

    Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.

    Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

    Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.

    Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Quantity:
    Retail Price: $70.71 In Stock: YES