Ultimate Passage Discount Marine Electronics
Call: 440-617-0025 (Ohio)
or QUESTIONS Via Email?  CLICK HERE!



  • Manufacturer
  • Category
  • What's ON SALE!
  • REBATE Items
  • Site Map
  •  Garmin
  •  Raymarine
  •  Lowrance
  •  Jabsco
  •  Motorguide
  •  Taco Down Riggers
  •  Xantrex
  •  NAVIONICS
     C-MAP
     Garmin Mapping
     Humminbird Charts
     Lowrance Insight
     Furuno Vector Charts
     Fishing Hot Spots
  • CONTACT US:
  • 440-617-0025 (Ohio)
    Monday-Thursday
    9am to 5pm
    Fridays until 3pm
    EASTERN TIME
    or
    via EMAIL Now!
  • Our Address:
    3399 Balsam Drive
    Westlake, OH 44145
    Note: NO RETURNS Accepted Here!
    Call/Email for an RMA.
  • Our Return Policy

  • Category: Instrument Housing

    NAVPOD RAILMOUNT UN-CUT (USABLE FACE=11.375"W X

    ** NavPod Part Number - RMX4600 **

    Our SKU# - 63985
    NAVPOD RAILMOUNT UN-CUT  (USABLE FACE=11.375"W X
    Click Here for Larger Image
    NavPod RMX4600 RailMount Uncut (Usable Face = 11.375"W x 6.75"H) (28.9cm W x 17.1cm H)
    NavPod Part Number:RMX4600
    MSRP/Retail Price:$479.99
    OUR PRICE:$348.97
    In Stock? NOT IN STOCK
    ETA: Usually Ships in 3-10 Days
    PRE-ORDER!
    Condition: BRAND NEW
    from NavPod

    (NOT a "Refurb" or "Reman"!)


    NavPod RMX4600 RailMount Uncut (Usable Face = 11.375"W x 6.75"H) (28.9cm W x 17.1cm H) RMX4600:

    RMX4600 RailMount Uncut (Usable Face = 11.375"W x 6.75"H) (28.9cm W x 17.1cm H)

    RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.

    All RailMounts Include:
    • Acrylic capped ABS plastic
    • Chromed stainless steel tamper-proof fasteners
    • Double Seal for watertight integrity
    • Models are available pre-cut for popular electronics
    • Chromed stainless steel arm with swivel mount
    • Two sets of adaptors included for 1" or 1.25" diameter tubing


    The Hi-Gloss Material
    NavPods are manufactured with a custom co-extruded acrylic capped
    ABS material. We use the absolute best UV resistant material that provides a
    very high gloss white finish that matches gel-coated fiberglass. The Gen3
    enhancements now include a thicker gauge material that improves strength and
    provides for better structural rigidity.

    The Waterproof Seal
    All NavPods are manufactured with a double gasket system providing
    an excellent watertight seal between the front and back of the NavPod for
    protection of your Marine Electronics. NavPods are made to withstand the
    harshest of wet offshore boating conditions. Gen3 enhancements include a
    thicker external silicone gasket with improved flush fit. The internal EPDM
    gasket is now 50% thicker and is not subject to "compression set" like many
    rubber compounds. This is important when you need to open the NavPod in the
    future to service your electronics.

    The Nickel Chrome Plated Screws
    We use all stainless steel mounting hardware that is supplied with
    each NavPod. Large round head tamperproof screws have deeper sockets for the
    NavPod wrench for better holding ability when tightening than the previous
    screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof
    screws for security combined with a little bling!

    The Manufacturing Process
    Heavy-gauge thermoforming is considered an art since many processes
    come into play. It all starts with the design and development of the
    tooling. We are fortunate to have experienced in-house design engineers who
    utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to
    interface with our CNC machining centers to produce quality tools with
    precision tolerances. We have re-designed and re-tooled all of the popular
    NavPods. We have reviewed all of the former products and selected the best
    design elements of each and incorporated them in every new Gen3
    product.

    Our Commitment to Quality
    We are committed to producing the best possible waterproof housing
    for Marine Electronics. Now with two decades of experience under our belt,
    we are confident you will have years of trouble free service and a long
    lasting high gloss finish. We will stand behind our commitment by now
    offering a 10-year warranty on all new Gen3 NavPods.
    Quantity:
    Retail Price: $479.99 Not in stock
    ETA: Usually Ships in 3-10 Days
    Pre-Order!