GBC009 Boost Eyelet Cable with SAE Adapter
NOCO Genius Boost eyelet cable with SAE adapter features a heavy-duty mountable eyelet design for automotive and powersport applications. Mount the eyelets to the battery for quick access to both charging and jump starting. Remove the adapter from the eyelets to connect directly to either the GB20, GB30, or GB40 Boost models, or connect the adapter to the eyelets to allow for plug-n-play with SAE equipped battery chargers. The eyelets were designed to efficiently transfer maximum current flow with minimal power loss, and the silicone insulation is suited for both heat stability and flexibility in cold weather applications. (CHARGER AND JUMP STARTER SOLD SEPARATELY)
Set and forget.
Easy access to your battery, whenever.
Hardwire the eyelet connectors to your battery terminals, so you only have to connect one time. Feed the ends of the cables to where you can have easy access for jump starting or charging your vehicle's battery. Charge the battery day in and day out, and bring Boost along to ensure a dead battery never stops you from going.
Make the switch quick.
Easily transition between your GB20, GB30, or GB40 Boost jump starter and your SAE equipped charger. The adapter is used when connecting the charger.
Make the switch if needed.
Hard-mounted eyelets provide for a more solid connection to the battery, which allows for a larger current of electricity to reach the battery. Easily transition to your GB20, GB30, or GB40 Boost jump starter to give the battery system a jump.
Control the slack for precise mounting.
The GBC009 is designed to be hard-mounted to the battery and left for convenience. The cord splitter allows for controlling the slack of the cords for safety in the tight space of the engine bay.
The right fit.
More often than not, dealing with components under the hood can lead to tight fits. Double check your battery terminals to make sure the eyelets work for your battery.
- Heavy-duty battery eyelet design for automotive, powersport, marine, RV, and truck applications.
- Hard-mount the eyelets for quick and convenient charging or jump starting.
- Lie-flat design for seamless installations with M6 (1/4-inch) hole size.
- Made from durable, heat stabilized 8AWG silicone wire that maintains its flexibility in cold weather environments.
- Designed to efficiently transfer maximum current flow with minimal power loss.
- Compatible with Boost UltraSafe Lithium Jump Starter models: GB20, GB30 and GB40.
- Attach the adapter for compatibility with SAE equipped battery chargers
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.